Illustration 1 g01097311 Right side view (1) Dowel Apply 7M-7456 Bearing Mount Compound to the dowel before installation. The dowel extends above the top surface…
Tag: engine
Remove Crankshaft Rear Seal & Wear Sleeve Start By: a. remove flywheel NOTE: The crankshaft rear seal and wear sleeve come as a set and…
Remove Crankshaft Front Seal & Wear Sleeve Start By: a. remove vibration damper NOTICE The crankshaft front seal and wear sleeve come as a set…
Remove Crankshaft Start By: a. remove timing gear cover b. remove flywheel housing c. remove pistons and connecting rod assemblies d. remove crankshaft rear seal…
Remove & Install Vibration Damper 1. Attach a strap and a suitable lifting device to vibration damper (1). Remove six bolts and washers (2) that…
Refer to Guideline For Reusable Parts And Salvage Operations, SEBF8009, “Main and Connecting Rod Bearings” and Guideline For Reusable Parts and Salvage Operations, SEBF8041, “Specifications…
Refer to Guideline For Reusable Parts, SEBF8009, “Main and Connecting Rod Bearings” and Guideline For Reusable Parts, SEBF8041, “Crankshaft Measurements”. Table 1 Connecting Rod Bearing…
Illustration 1 g00955608 Note: For the correct procedure on measuring for a bent crankshaft, refer to the Guideline for Reusable Parts, SEBF8054, “Procedure to Measure…
Remove & Install Camshaft Start By: a. rocker arm and shaft assemblies b. remove fan drive NOTE: When removing cover (1) from the timing gear…
Type 1 Illustration 1 g00562795 185-9699 Camshaft Group (1) Exhaust lobe (2) Injector lobe (3) Inlet lobe Note: Lubricate the camshaft lobes with a 50/50…