Remove & Install Fuel Priming Pump Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing,…

Illustration 1 g00285323 (1) Torque for nut … 24 ± 4 N·m (18 ± 3 lb ft) (2) 7S-9323 Spring Length under test force ……

Illustration 1 g00286270 (1) The stud is used when the filter base is installed high on the inlet manifold. Install the stud so that the…

Remove & Install Crankshaft Main Bearings Start By: a. remove oil pump 1. Check the main bearing caps for identification for their location and direction…

Remove & Install Connecting Rod Bearings Start By: a. remove oil pump 1. Check the connecting rods and caps for their identification and location. 2.…

Remove Camshaft Bearings Start By: a. remove cylinder head * b. remove camshaft *The cylinder head must be off the engine to allow the cam…