Table 1 Specification for the 7N-9693 Tension Chart Item Qty Part Specification Description – …
Tag: engine
Remove & Install Air Compressor Start By: a. remove fuel filter and base b. remove fuel control valve Fluid Spillage Containment Care must be taken…
Remove & Install Water Pump Start By: a. remove water temperature regulator and manifold b. remove the oil cooler and oil filter base Fluid Spillage…
Illustration 1 g02542337 Table 1 Specification for the 174-5986 Water Pump Gp , 161-0969 Water Pump Gp , and 100-9347 Water Pump Gp …
Remove & Install Water Temperature Regulator & Manifold Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection,…
Illustration 1 g02542379 Table 1 Specification for the 247-7133 Water Temperature Regulator Item Qty Part Specification Description…
Illustration 1 g00615245 Typical example (1) Cover bolts Tighten the cover bolts to the following torque. … 50 ± 9 N·m (37 ± 7 lb…
Remove & Install Fan Drive Assembly 1. Loosen two bolts (2) and two nuts (5). Back out bolt (1) until it is clear of adapter…
Illustration 1 g02549238 Table 1 Specification for 228-8533 Fan Drive Gp 228-8534 Fan Drive Gp 228-8535 Fan Drive Gp, 120-4231 Fan Drive Gp, 120-4233 Fan…
Illustration 1 g01448163 (A) Apply 7M-7456 Compound to the tapered end of the stud to the following length. … 10.0 ± 1.5 mm (0.39 ±…