3N7840 CLUTCH A force (F) of 95 to 125 lbs. (425 to 555 N) must be necessary to engage the clutch. The force must be…
Tag: engine
Remove Camshaft & Gears Start By: a. remove timing gear cover and oil pump b. remove valve lifters c. remove turbocharger 1. Remove the plug…
Remove Camshaft Bearings Start By: a. remove crankshaft and gear b. remove camshaft and gears NOTE: The crankshaft does not have to be removed for…
Remove Camshaft Bearings start by: a) remove crankshaft and gear b) remove camshaft and gears NOTE: The crankshaft does not have to be removed for…
Remove Camshaft And Gears start by: a) remove timing gear cover and oil pump b) remove valve lifters c) remove turbocharger 1. Remove the plug…
NOTE: For installation of camshaft, the timing mark on the camshaft gear tooth must be in alignment with the timing mark on the tooth space…
Camshaft Installation (1) Diameter of the surfaces (journals) for the camshaft bearings (new) … 2.5000 ± .0005 in.(63.500 ± 0.013 mm) Bore in the five…
Remove Air Compressor Before any air lines or hoses are disconnected, be sure the system’s pressure is zero. NOTE: Put identification marks on all lines,…