Illustration 1 g00379837 Typical example (1) Apply 4C-5593 Anti-Seize Compound to all of the bolts at assembly. Torque for bolts … 215 ± 40 N·m…

Remove & Install Valve Guides Start By: a. remove valves Typical Example 1. Use Tool (A) and a hammer to push the valve guides out…

Remove & Install Valve Seat Inserts Start By: a. remove cylinder head b. remove valves Typical Example 1. Use Tooling (A) to remove the valve…

Remove & Install Valve Seals *Part of 9U-7226 Valve Seal Installer Group. Start By: a. remove valve spring assembly NOTE: The valve seals can be…

Remove & Install Valves Start By: a. remove cylinder head 1. Position the cylinder head on its side as shown. NOTE: To remove valve spring…

Remove & Install Valve Springs *Part of 9U-7241 Valve Spring Compressor Group. Start By: a. remove rocker arm and shaft assemblies b. remove electronic unit…

Remove & Install Cylinder Head Assembly Start By: a. remove exhaust manifold b. remove water temperature regulator c. remove rocker arm and shaft assemblies d.…

Illustration 1 g01025099 The bolts that are marked “X” are 216 mm (8.5 inch) long. The lengths of the remaining bolts are 194 mm (7.6…

Illustration 1 g00285625 Note: Coat the inlet and the exhaust valve stems with 8T-2998 Lubricant prior to installation in the cylinder head. (1) 102-7665 Spring…

Remove & Install Cylinder Liners Start By: a. remove pistons and connecting rod assemblies 1. Put covers on the journals of the crankshaft for protection…