Remove & Install Flywheel Housing Start By: a. remove crankshaft rear seal and wear sleeve b. remove electric starting motor c. remove oil pan Typical…
Tag: 3406E
Remove & Install Timing Gears & Plate Start By: a. remove timing gear cover NOTICE Do not turn the crankshaft with the camshaft gear removed.…
Remove & Install Timing Gear Cover Start By: a. remove fan drive b. remove oil pan c. remove engine front support 1. Remove cover (1)…
Illustration 1 g02555096 Table 1 Specification for 147-3754 Rear Gear Gp Item Qty Part Specification Description …
Illustration 1 g01090281 (1) Water pump drive gear Illustration 2 g00537659 Stub shaft for cluster gear (2) Cluster gear Apply 9S-3263 Thread Lock Compound to…
Remove & Install Flywheel 1. Fasten a hoist to Tool (A). Install Tool (A) to the flywheel. 2. Remove bolts (1) that hold the flywheel…
Illustration 1 g00383655 4N-0732 Flywheel Housing Note: During assembly, inspect the following components for any foreign materials: the front face of the flywheel housing, the…
Illustration 1 g00390312 3N-8804 Flywheel Group Note: Refer to the System Operation, Testing & Adjusting, “Flywheel Runout” for the correct method of flywheel inspection. (1)…
Remove & Install Pump Drive 1. Remove three bolts and washers (2). Remove one nut and washer (3). Remove pump drive and pump drive housing…
Illustration 1 g00288837 (1) Tighten the air compressor shaft nut to the following torque. … 460 ± 60 N·m (340 ± 44 lb ft)