|
|
|
|
|
|
| Illustration 1 | g00379837 |
|
Typical example |
|
(1) Apply 4C-5593 Anti-Seize Compound to all of the bolts at assembly.
Torque for bolts … 215 ± 40 N·m (158 ± 29 lb ft)
(2) Adapter
(3) Damper assembly
(4) Pulley
Note: The dash marks on the front of the damper assembly must be in alignment with each other. A new damper assembly will be needed if the dash marks are not in alignment.
Maximum permissible face runout of the damper assembly … 0.00 to 2.03 mm (0.000 to 0.080 inch)
|
|
| NOTICE |
|---|
|
Thoroughly inspect the viscous damper for signs of leakage or for signs of a dented (damaged) case. Either of these conditions can cause the weight to make contact with the case. This can affect the viscous damper’s operation. |
|
|
|
|
|
|
|
|
| Illustration 2 | g00379840 |
|
Typical example |
|
(1) Apply 4C-5593 Anti-Seize Compound to all of the bolts at assembly.
Torque for bolts … 215 ± 40 N·m (158 ± 29 lb ft)
(2) Adapter
(3) Damper assembly
(4) Pulley
Note: The dash marks on the front of the damper assembly must be in alignment with each other. A new damper assembly will be needed if the dash marks are not in alignment.
Maximum permissible face runout of the damper assembly … 0.00 to 2.03 mm (0.000 to 0.080 inch)