Remove & Install Piston Cooling Jets Start By: a. remove oil pump Fluid Spillage Containment Care must be taken to ensure that fluids are contained…

Remove & Install Spacer Plate Start By: a. remove cylinder head assembly 1. Remove gasket (2) from spacer plate (1). 2. Remove O-ring seal (3)…

Illustration 1 g01431778 The following steps are for installing the cylinder liner into the cylinder block. Apply 5P-3975 Rubber Lubricant on the surfaces of the…

Illustration 1 g01097311 Right side view (1) Dowel Apply 7M-7456 Bearing Mount Compound to the dowel before installation. The dowel extends above the top surface…

Remove Crankshaft Rear Seal & Wear Sleeve Start By: a. remove flywheel NOTE: The crankshaft rear seal and wear sleeve come as a set and…

Remove Crankshaft Front Seal & Wear Sleeve Start By: a. remove vibration damper NOTICE The crankshaft front seal and wear sleeve come as a set…

Remove Crankshaft Start By: a. remove timing gear cover b. remove flywheel housing c. remove pistons and connecting rod assemblies d. remove crankshaft rear seal…

Remove & Install Vibration Damper 1. Attach a strap and a suitable lifting device to vibration damper (1). Remove six bolts and washers (2) that…

Refer to Guideline For Reusable Parts And Salvage Operations, SEBF8009, “Main and Connecting Rod Bearings” and Guideline For Reusable Parts and Salvage Operations, SEBF8041, “Specifications…

Refer to Guideline For Reusable Parts, SEBF8009, “Main and Connecting Rod Bearings” and Guideline For Reusable Parts, SEBF8041, “Crankshaft Measurements”. Table 1 Connecting Rod Bearing…