Use compressed air in order to check the piston cooling jets for plugging. Visually inspect the piston cooling jets for damage or distortion. If damage…

Steel Piston Table 1 Specification for 212-3652 Piston and Rod Gp  Item Qty Part Specification Description – – – Install the rod and steel pistons in the…

  Note: Handle the fractured connecting rod with care. Use a soft jawed vise in order to hold the connecting rod while loosening the connecting rod…

Front Crankshaft Seal Note: The front crankshaft seal and the crankshaft seal excluder are serviced separately. (1) Install the front crankshaft seal. Ensure that the…

Table 1 Specification for 210-5590 Crankshaft Gp  Item Qty Part Specification Description A – 2W-8147 Gear Average diameter of gear after assembly is 112.48 ± 0.10 mm (4.428…

(1) Installation depth of the two cup plugs from the block face to the top edge of the plug … 1.25 ± 0.25 mm (0.049…

Left side view of engine (3) Cover (2) Install the gasket so that the bead is facing the cover. Note: Apply 1U-8846 Gasket Sealant to…

Table 1 Specification for 126-5869 Water Temperature Regulator , and 119-3075 Water Temperature Regulator  Item Qty Part Specification Description – – – Start to open temperature of the water…

Typical example Note: The sealing surfaces of the oil pan shall be free of oil, debris, gasket material that is protruding, or any other sealant. The…

Use the following procedure to install the oil filter base assembly: Note: For bolt (1), bolt (4), bolt (10), and bolt (14), use M8 X 1.25-45…