Use the following procedure to install the oil filter base assembly:
Note: For bolt (1), bolt (4), bolt (10), and bolt (14), use M8 X 1.25-45 mm bolts.
- Tighten the bolt (1) through bolt (15) in a numerical sequence to 28 ± 7 N·m (21 ± 5 lb ft).
- Again tighten the bolt (1) through bolt (15) in a numerical sequence to 28 ± 7 N·m (21 ± 5 lb ft).
(16) 242-3864 Spring
Quantity … 2
Length under test force … 43.18 mm (1.700 inch)
Test force … 43.7 N (9.8 lb)
Free length after test … 58.50 ± 0.50 mm (2.303 ± 0.020 inch)
Outside diameter … 11 mm (0.4 inch)
(A) Length for applying 154-9731 Thread Lock Compound to the threads of the hollow stud … 7.5 ± 1.5 mm (0.30 ± 0.06 inch)
(17) Torque for the hollow stud … 68 ± 7 N·m (50 ± 5 lb ft)