Installation of the High Pressure Oil Line Thread connector assembly (1) by hand before additional tightening.   Torque the connector assembly (1) to 48 ±…

Table 1 Specification for 183-6845 Exhaust Manifold Gp  Item Qty Part Specification Description Mounting surfaces of the exhaust manifold should be clean and dry. In addition, mounting…

(1) Torque for the clamp assembly … 13.5 ± 1.0 N·m (119.5 ± 8.9 lb in) (2) Use the following procedure to tighten the clamp…

Table 1 Specification for 219-5849 Cylinder Head Gp  Item Qty Part Specification Description – 14 142-7289 Cylinder Head Fastener Gp Use the following procedure to tighten the cylinder…

(1) Exhaust valve (2) Inlet valve Note: The inlet and exhaust valve stems must be coated with clean unused engine oil prior to installation in…

Tightening sequence for the valve mechanism cover Tighten the bolts in a numerical sequence to the following torque. … 15 ± 3 N·m (11 ±…

(1) Torque for the bolt … 25 ± 6 N·m (220 ± 55 lb in) (2) Torque for the bolt … 13 ± 3 N·m…

Table 1 Specifications for 174-9570 Water Separator and Fuel Filter Gp and 212-9580 Water Separator, and Fuel Filter Gp  Item Qty Part Specification Description 1 1 343-5527 Bowl Torque to…

(1) Put 155-0695 Thread Lock Compound on the tapered end of the stud to the following distance. … 7.6 ± 1.5 mm (0.30 ± 0.06…

(A) Length for applying 154-9731 Thread Lock Compound to the threads on the taperlock end of the fuel filter insert … 7.6 ± 1.5 mm…