Illustration 1 g00955608 Note: For the correct procedure on measuring for a bent crankshaft, refer to the Guideline for Reusable Parts, SEBF8054, “Procedure to Measure…
Tag: 3406E
Remove & Install Camshaft Start By: a. rocker arm and shaft assemblies b. remove fan drive NOTE: When removing cover (1) from the timing gear…
Type 1 Illustration 1 g00562795 185-9699 Camshaft Group (1) Exhaust lobe (2) Injector lobe (3) Inlet lobe Note: Lubricate the camshaft lobes with a 50/50…
Table 1 Specification for the 7N-9693 Tension Chart Item Qty Part Specification Description – …
Remove & Install Air Compressor Start By: a. remove fuel filter and base b. remove fuel control valve Fluid Spillage Containment Care must be taken…
Remove & Install Water Pump Start By: a. remove water temperature regulator and manifold b. remove the oil cooler and oil filter base Fluid Spillage…
Illustration 1 g02542337 Table 1 Specification for the 174-5986 Water Pump Gp , 161-0969 Water Pump Gp , and 100-9347 Water Pump Gp …
Remove & Install Water Temperature Regulator & Manifold Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection,…
Illustration 1 g02542379 Table 1 Specification for the 247-7133 Water Temperature Regulator Item Qty Part Specification Description…
Illustration 1 g00615245 Typical example (1) Cover bolts Tighten the cover bolts to the following torque. … 50 ± 9 N·m (37 ± 7 lb…