|
|
|
|
|
|
| Illustration 1 | g02555096 |
| Specification for 147-3754 Rear Gear Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 9X-7371 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 2 | 1 | 4N-1230 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 3 | 1 | 6V-1197 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 4 | 1 | 8F-8804 Bolt | Torque to 136.0 ± 13.6 N·m (100.3 ± 10.0 lb ft) |
| 5 | 1 | 1D-4569 Bolt | Torque to 136.0 ± 13.6 N·m (100.3 ± 10.0 lb ft) |
| 6 | 1 | 2S-4663 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 7 | 1 | 4N-0848 Wear Sleeve | Clean the wear sleeve. Also, prime the inner diameter of the wear sleeve and the outer diameter of the crankshaft with 8T-9021 Adhesive. Apply green Loctite 620to the outer diameter of the crankshaft. Install the wear sleeve onto the crankshaft. |
| 8 | 1 | 6V-3319 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |