Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Gp 1 B 5P-9722 Seal Driver 1 NOTICE…
Author: sam
Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Gp 1 Start By: Remove the water pump. Refer to…
Replacement Procedure You can replace CAT C7 Water Pump Start By: Remove the alternator, if necessary. Refer to Disassembly and Assembly, “Alternator – Remove and…
Installation Procedure Note: Ensure that the mounting surfaces for the engine oil pump are thoroughly clean. Install the O-ring seal. Position engine oil pump (3)…
Assembly Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Ensure that all of…
Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver 1 Start By: Remove the engine oil pump. Refer to…
Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A (1) 6V-4194 Valve Seat Extractor (2) 1 165-5647 Valve Seat Extractor (3) 1…
C7 Industrial Engines Disassembly and Assembly – Inlet and Exhaust Valve Guides – Remove and Install
Start By: Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, “Inlet and Exhaust Valves – Remove and Install”. NOTICE Keep…
Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 5S-1330 Valve Spring Compressor 1 Start By: Remove the cylinder head. Refer…
Removal Procedure Start By: Remove the cylinder head. Refer to Disassembly and Assembly, “Cylinder Head – Remove”. Use Tooling (A) in order to compress the…