Removal Procedure Disconnect the battery. Refer to Operation and Maintenance Manual, “Battery or Battery Cable – Disconnect”. Disconnect cable assembly (1) . Disconnect harness…
Author: sam
Installation Procedure Apply Tooling (A) to the turbocharger mounting studs on the exhaust manifold. The weight of turbocharger (1) is approximately 17 kg (38 lb).…
Removal Procedure Disconnect hose assembly (2) . Remove bolts (4) and tube assembly (3) . The weight of turbocharger (1) is approximately 17…
Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 185-3630 Strap Wrench Assembly 1 NOTICE Keep all parts clean…
The indicator lamp will turn on when a warning, a derate, or a shutdown is activated by the Electronic Control Module (ECM). Use this procedure…
Probable Causes Oil specifications Engine oil temperature reading Engine oil cooler bypass valve High coolant temperature Engine oil cooler Recommended Actions Table 1 Troubleshooting…
Probable Causes Engine oil level Engine oil filters and oil filter bypass valve Engine oil pump Engine oil cooler Fuel dilution Engine wear Recommended…
Always verify fuel dilution. Submit an oil sample to a Caterpillar regional SOS laboratory for analysis. Note: For additional information, refer to Special Instructions, REHS3007, “Determining…
Probable Causes Oil leaks Oil level Turbocharger seal Internal engine wear Recommended Actions Table 1 Troubleshooting Test Steps Values Results 1. Oil Leaks A. Check…
When the engine is at operating temperature and you are using SAE 10W30 oil, the maximum oil temperature is 115 °C (239 °F). This is…