Posted on

C7 Industrial Engines Disassembly and Assembly – Water Pump – Disassemble

Disassembly Procedure

Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1

Start By:

  1. Remove the water pump. Refer to Disassembly and Assembly, “Water Pump – Remove”.

  1. Remove O-ring seals (1) and (2) .

 

  1. Remove bolts (3) and the washers. Remove rear cover (4) and gasket (5) .

 

  1. Use Tooling (A) and a suitable press in order to remove hub (10) and water pump housing (8) from shaft (9) .

 

  1. Use Tooling (A) and a suitable press in order to remove impeller (6) from shaft (9).

 

  1. Use Tooling (A) to remove seal (7) from water pump housing (8) .

 

Posted in C7

Leave a Reply

Your email address will not be published. Required fields are marked *