Remove & Install Water Temperature Regulator & Manifold Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection,…
Author: sam
Illustration 1 g02542379 Table 1 Specification for the 247-7133 Water Temperature Regulator Item Qty Part Specification Description…
Illustration 1 g00615245 Typical example (1) Cover bolts Tighten the cover bolts to the following torque. … 50 ± 9 N·m (37 ± 7 lb…
Remove & Install Fan Drive Assembly 1. Loosen two bolts (2) and two nuts (5). Back out bolt (1) until it is clear of adapter…
Illustration 1 g02549238 Table 1 Specification for 228-8533 Fan Drive Gp 228-8534 Fan Drive Gp 228-8535 Fan Drive Gp, 120-4231 Fan Drive Gp, 120-4233 Fan…
Illustration 1 g01448163 (A) Apply 7M-7456 Compound to the tapered end of the stud to the following length. … 10.0 ± 1.5 mm (0.39 ±…
Assemble the Starting Motor Table 1 Required Tools Tool Part Number Description Quantity A …
Assemble the Starting Motor Table 1 Required Tools Tool Part Number Part Description Quantity A…
Disassemble the Starting Motor Start By: Remove the starting motor from the machine. Note: The disassembly of the 12 volt starting motor is similar to…
Disassemble the Starting Motor Note: The disassembly and assembly that follows is of the 24 volt starting motor. The 12 volt is similar. Table 1…