Remove & Install Vibration Damper 1. Attach a strap and a suitable lifting device to vibration damper (1). Remove six bolts and washers (2) that…
Author: sam
Refer to Guideline For Reusable Parts And Salvage Operations, SEBF8009, “Main and Connecting Rod Bearings” and Guideline For Reusable Parts and Salvage Operations, SEBF8041, “Specifications…
Refer to Guideline For Reusable Parts, SEBF8009, “Main and Connecting Rod Bearings” and Guideline For Reusable Parts, SEBF8041, “Crankshaft Measurements”. Table 1 Connecting Rod Bearing…
Illustration 1 g00955608 Note: For the correct procedure on measuring for a bent crankshaft, refer to the Guideline for Reusable Parts, SEBF8054, “Procedure to Measure…
Remove & Install Camshaft Start By: a. rocker arm and shaft assemblies b. remove fan drive NOTE: When removing cover (1) from the timing gear…
Type 1 Illustration 1 g00562795 185-9699 Camshaft Group (1) Exhaust lobe (2) Injector lobe (3) Inlet lobe Note: Lubricate the camshaft lobes with a 50/50…
Table 1 Specification for the 7N-9693 Tension Chart Item Qty Part Specification Description – …
Remove & Install Air Compressor Start By: a. remove fuel filter and base b. remove fuel control valve Fluid Spillage Containment Care must be taken…
Remove & Install Water Pump Start By: a. remove water temperature regulator and manifold b. remove the oil cooler and oil filter base Fluid Spillage…
Illustration 1 g02542337 Table 1 Specification for the 174-5986 Water Pump Gp , 161-0969 Water Pump Gp , and 100-9347 Water Pump Gp …