Table 1 Specification for 126-5869 Water Temperature Regulator , and 119-3075 Water Temperature Regulator  Item Qty Part Specification Description – – – Start to open temperature of the water…

Typical example Note: The sealing surfaces of the oil pan shall be free of oil, debris, gasket material that is protruding, or any other sealant. The…

Use the following procedure to install the oil filter base assembly: Note: For bolt (1), bolt (4), bolt (10), and bolt (14), use M8 X 1.25-45…

Installation of the High Pressure Oil Line Thread connector assembly (1) by hand before additional tightening.   Torque the connector assembly (1) to 48 ±…

Table 1 Specification for 183-6845 Exhaust Manifold Gp  Item Qty Part Specification Description Mounting surfaces of the exhaust manifold should be clean and dry. In addition, mounting…

(1) Torque for the clamp assembly … 13.5 ± 1.0 N·m (119.5 ± 8.9 lb in) (2) Use the following procedure to tighten the clamp…

Table 1 Specification for 219-5849 Cylinder Head Gp  Item Qty Part Specification Description – 14 142-7289 Cylinder Head Fastener Gp Use the following procedure to tighten the cylinder…

(1) Exhaust valve (2) Inlet valve Note: The inlet and exhaust valve stems must be coated with clean unused engine oil prior to installation in…

Tightening sequence for the valve mechanism cover Tighten the bolts in a numerical sequence to the following torque. … 15 ± 3 N·m (11 ±…

(1) Torque for the bolt … 25 ± 6 N·m (220 ± 55 lb in) (2) Torque for the bolt … 13 ± 3 N·m…