Table 1 Specifications for 174-9570 Water Separator and Fuel Filter Gp and 212-9580 Water Separator, and Fuel Filter Gp  Item Qty Part Specification Description 1 1 343-5527 Bowl Torque to…

(1) Put 155-0695 Thread Lock Compound on the tapered end of the stud to the following distance. … 7.6 ± 1.5 mm (0.30 ± 0.06…

(A) Length for applying 154-9731 Thread Lock Compound to the threads on the taperlock end of the fuel filter insert … 7.6 ± 1.5 mm…

Illustration 1 g01114899 (A) Exhaust valve (B) Inlet valve Bore … 110.0 mm (4.33 inch) Stroke … 127.0 mm (5.00 inch) Displacement … 7.2 L…

A failed water pump might cause severe engine overheating problems that could result in the following conditions:   Cracks in the cylinder head  A piston…

Periodic inspection and cleaning are recommended for the turbocharger compressor housing (inlet side). Any fumes from the crankcase are filtered through the air inlet system.…

Severe service is an application of an engine that exceeds current published standards for that engine. Caterpillar maintains standards for the following engine parameters:  …

Note: Adjust the frequency of cleaning according to the effects of the operating environment. Inspect the radiator for these items: damaged fins, corrosion, dirt, grease, insects,…

Reduced hours of operation at full load will result in a lower average power demand and reduced fuel consumption. A decreased average power demand should…

Hoses and clamps must be inspected periodically and replaced at the recommended interval to ensure safe and continuous operation of the engine. Failure to replace…