Remove Exhaust Manifolds 1. Remove two bolts (1) from the flanges. 2. Bend the tabs back on locks (2). 3. Remove the bolts, exhaust manifold…

Remove Exhaust Manifold 1. Remove two bolts (1) from the flanges. 2. Bend the tabs back on locks (2). 3. Remove the bolts, exhaust manifold…

Put 5P3931 Anti-Seize Compound on threads of bolts. Locks must be bent on a flat side of the bolt head. Bolts must be turned no…

Put 5P3931 Anti-Seize Compound on threads of bolts. Locks must be bent on a flat side of the bolt head. Bolts must be turned no…

Remove Air Inlet Manifold Start By: a. remove air cleaner assembly 1. Put identification marks on all hoses, tubes and lines before any disconnections are…

Remove Air Inlet Manifold start by: a) remove turbocharger 1. Loosen clamps (1) and (2). Disconnect the hoses (3) from the manifold. 2. Remove seven…

Remove Air Inlet Manifold 1. Loosen clamps (1) and (3). Disconnect the hoses. 2. Remove bolts (2) and elbow (4). 3. Loosen clamps (6) and…

Typical Example Tighten bolts (3) and (4) to … 20 ± 7 N·m (15 ± 5 lb ft) Then tighten all bolts in number sequence…

Remove Crankcase Ventilator Valve start by: a) remove valve covers 1. Remove four bolts (2), ventilator valve (1) and the gasket. Install Crankcase Ventilator Valve…