(1) Crankcase ventilation valve. (2) Gasket. Apply 3M “Feathering Disc Adhesive” Type-2, Part No. 8051 to the gasket to adhere it to the valve cover.…
Author: sam
Remove & Install Air Cleaner Assembly 1. Fasten lifting slings and a hoist to air cleaner assembly (1). Remove bolts (2), and remove air cleaner…
Remove & Install Aftercooler Start By: a. remove turbocharger b. remove air inlet manifold Fluid Spillage Containment Care must be taken to ensure that fluids…
Remove & Install Turbocharger Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and…
Illustration 1 g00288169 Typical example (1) Tighten the clamp bolts to the following torque. … 14 ± 3 N·m (10 ± 2 lb ft) Lightly…
Remove & Install Exhaust Manifold Start By: a. remove turbocharger b. remove water regulator housing 1. Remove the nuts and spacers (1), and remove exhaust…
Illustration 1 g00284845 Typical example (1) A thin film of 2P-2333 High Temperature Sealer is applied to the outside diameter of the male end of…
Remove & Install Rocker Arm & Shaft Assemblies Start By: a. remove the valve cover(s) Valve rocker arms (1) and unit injector rocker arms (2)…
Remove & Install Valve Cover Base Start By: a. remove valve covers 1. Loosen the two nuts and remove connector (2) from electronic unit injector…
Remove & Install Valve Covers Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…