Remove And Install Crankshaft Main Bearings start by: a) remove oil pan 1. Check each main bearing cap for its location on the engine. Each…
Author: sam
Heat gear to install. Do not heat to a temperature of more than 260°C (500°F). (1) Endplay for the crankshaft … 0.08 to 0.30 mm…
9N0542 Crankshaft Seal Group (1) 7C6660 Hydrodynamic Seal Group. (2) 7W3200 Hydrodynamic Seal Group. (A) The distance from the edge of 7C6660 Hydrodynamic Seal Group…
Heat gear to install. Do not heat to a temperature of more than 500°F (260°C). (1) End play for the crankshaft … .003 to .010…
2N1373 A force (F) of 525 to 695 N (118 to 156 lb) must be necessary to engage the clutch. The force must be at…
2N1373 CLUTCH A force (F) of 118 to 156 lbs. (525 to 695 N) must be necessary to engage the clutch. The force must be…
3N7840 CLUTCH A force (F) of 95 to 125 lbs. (425 to 555 N) must be necessary to engage the clutch. The force must be…
Remove Camshaft & Gears Start By: a. remove timing gear cover and oil pump b. remove valve lifters c. remove turbocharger 1. Remove the plug…
Remove Camshaft Bearings Start By: a. remove crankshaft and gear b. remove camshaft and gears NOTE: The crankshaft does not have to be removed for…
Remove Camshaft Bearings start by: a) remove crankshaft and gear b) remove camshaft and gears NOTE: The crankshaft does not have to be removed for…