Measure wear of the cylinder bore at the top and bottom of piston ring travel. (1) Cylinder bore [standard, original size] … 4.5000 to 4.5015…
Author: sam
Remove Crankshaft & Gear Start By: a. remove flywheel housing b. remove valve lifters c. remove pistons and connecting rod assemblies d. remove timing gear…
Remove Crankshaft Rear Seal & Wear Sleeve Start By: a. remove flywheel NOTICE Any time the crankshaft rear seal is removed from the wear sleeve,…
Remove & Install Crankshaft Main Bearings Start By: a. remove oil pan 1. Check each main bearing cap for its location on the engine. Each…
Remove Crankshaft Front Seal Start By: a. remove crankshaft pulley 1. Remove the front seal with Tool (A). Install Crankshaft Front Seal 1. Put 5H-2471…
Remove Crankshaft Pulley 1. Loosen the tension on the vee belts, and remove vee belts (1) from the crankshaft pulley. 2. Remove bolts (2). Remove…
Remove Crankshaft And Gear start by: a) remove flywheel housing b) remove valve lifters c) remove pistons d) remove timing gear cover and oil pump…
Remove Crankshaft Rear Seal And Wear Sleeve start by: a) remove flywheel 1. Remove the crankshaft rear seal from the flywheel housing with tooling (A).…
Remove Crankshaft Front Seal start by: a) remove crankshaft pulley 1. Remove the front seal with tool group (A). Install Crankshaft Front Seal 1. Put…
Remove Crankshaft Pulley 1. Remove the vee belts from the front of the engine. 2. Remove bolt (1) and washer (2) from the crankshaft. 3.…