Installation Procedure Note: Place clean engine oil on the crankshaft main bearings prior to assembly. Ensure that the tabs on the back side of the…
Tag: crankshaft
Removal Procedure Start By: A.Remove the engine oil pump. Refer to Disassembly and Assembly, “Engine Oil Pump – Remove”. 1.Remove bolts (1). Remove crankshaft main…
Installation Procedure 1.Use Tooling (C) to install crankshaft front seal (1) . Note: The crankshaft seal is designed to be installed dry. End By: Install…
Removal Procedure Start By: A.Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, “Vibration Damper and Pulley – Remove and Install”. 1.Use…
Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty C (1) …
Removal Procedure Start By: A.Remove the crankshaft rear seal. Refer to Disassembly and Assembly, “Crankshaft Rear Seal – Remove”. Note: Wear sleeves are not installed…
Typical Example 4P4454 Crankshaft Pulley Group (1) Bolt. Tighten bolts to a torque of … 200 ± 25 N·m (150 ± 18 lb ft) 4W5429…
(1) Gear. For installation heat gear (do not use a torch) to … 316°C (600°F) (2) End play for crankshaft assembled in engine … 0.07…
Rear Crankshaft Seal Groups: “A”- Single Lip, “Dry” Applications “B”- Double Lip, “Wet” Applications Front Crankshaft Seal Refer to Disassembly And Assembly for the complete…
Removal Procedure Start By: Remove the flywheel housing. Refer to Disassembly and Assembly, “Flywheel Housing – Remove and Install”. Remove bolts (1) . Remove rear…