3116 and 3126 Truck Engines Crankshaft Front Seal – Remove

Removal Procedure
Start By:

A.Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, “Vibration Damper and Pulley – Remove and Install”.

1.Use Tooling (B) and carefully drill three evenly spaced holes in crankshaft front seal (1) .

2.Alternate between the drilled holes and use Tooling (A) to remove crankshaft front seal (1) .

Leave a Reply

Your email address will not be published. Required fields are marked *