(1) End play for shaft (new) … .0020 to .0032 in.(0.501 to 0.081 mm) (2) Tighten bolts that hold back plate to bearing housing to…
Tag: 3208
(1) Nut for impeller (See TURBOCHARGER IMPELLER INSTALLATION). NOTICE Do not bend or add stress to the shaft when nut is tightened. (2) Torque for…
(1) End play for shaft (new) … .0045 ± .0015 in.(0.114 ± 0.038 mm) Maximum permissible end play (worn) … .008 in.(0.20 mm) (2) Thickness…
TEST FOR TYPE OF IMPELLER INSTALLATION 1. Install the proper thrust collar and seal carrier spacer on the shaft wheel assembly to be used. 2.…
Remove Exhaust Manifolds 1. Remove two bolts (1) from the flanges. 2. Bend the tabs back on locks (2). 3. Remove the bolts, exhaust manifold…
Remove Exhaust Manifold 1. Remove two bolts (1) from the flanges. 2. Bend the tabs back on locks (2). 3. Remove the bolts, exhaust manifold…
Put 5P3931 Anti-Seize Compound on threads of bolts. Locks must be bent on a flat side of the bolt head. Bolts must be turned no…
Put 5P3931 Anti-Seize Compound on threads of bolts. Locks must be bent on a flat side of the bolt head. Bolts must be turned no…
Remove Air Inlet Manifold Start By: a. remove air cleaner assembly 1. Put identification marks on all hoses, tubes and lines before any disconnections are…