Remove & Install Turbocharger Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and…
Tag: 3406E
Illustration 1 g00288169 Typical example (1) Tighten the clamp bolts to the following torque. … 14 ± 3 N·m (10 ± 2 lb ft) Lightly…
Remove & Install Exhaust Manifold Start By: a. remove turbocharger b. remove water regulator housing 1. Remove the nuts and spacers (1), and remove exhaust…
Illustration 1 g00284845 Typical example (1) A thin film of 2P-2333 High Temperature Sealer is applied to the outside diameter of the male end of…
Remove & Install Rocker Arm & Shaft Assemblies Start By: a. remove the valve cover(s) Valve rocker arms (1) and unit injector rocker arms (2)…
Remove & Install Valve Cover Base Start By: a. remove valve covers 1. Loosen the two nuts and remove connector (2) from electronic unit injector…
Remove & Install Valve Covers Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…
Illustration 1 g01431260 Typical Example Illustration 2 g00285630 Tightening Sequence For Valve Cover And Base Note: Apply 4C-4030 Thread Lock Compound to the bolts that…
Illustration 1 g00859782 (1) Valve rocker arm assembly (2) Valve lash Inlet valves … 0.38 ± 0.08 mm (0.015 ± 0.003 inch) Exhaust valves ……
Illustration 1 g00287811 (1) Ball (2) Diameter of rocker arm shaft … 40.000 ± 0.010 mm (1.5748 ± 0.0004 inch)