Illustration 1 g00297167 Typical example (1) Inlet port (2) Pressure regulating valve The pump performance has the following specifications. The specifications are obtained when the…
Tag: engine
Illustration 1 g02557382 (3) Spacer (4) Unit injector clamp Table 1 Specification for the 190-0009 Fuel Pump and Valve Mechanism, 148-7482 Fuel Pump and Valve…
Remove & Install Injector Sleeves *Part of 9U-6891 Sleeve Tool Group Start By: a. remove rocker arm and shaft assemblies b. remove electronic unit injectors…
Remove & Install Electronic Unit Injectors Start By: a. remove rocker shaft assembly Fluid Spillage Containment Care must be taken to ensure that fluids are…
Remove & Install Fuel Manifold Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…
Remove & Install Oil Pump Start By: a. remove oil pan Fluid Spillage Containment Care must be taken to ensure that fluids are contained during…
Illustration 1 g01527219 NOTICE Before operation, the pump must be lubricated with clean engine oil and the pump must turn freely by hand or damage…
Illustration 1 g00286386 (1) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. … 10.5 mm (0.41 inch)…
Illustration 1 g00287839 6I-3944 Oil Filler Illustration 2 g00381732 110-8876 Oil Filler (1) Tighten the bolts to the following torque. … 25 ± 6 N·m…
Illustration 1 g02704189 Table 1 Specification for 2N-8220 Breather Gp and 9Y-2989 Breather Gp Item Qty Part …