Stator Winding Continuity Test Illustration 1 g00873098 Stator (1) Leads (2) Frame Remove the stator from the alternator. Connect the multimeter leads across each pair…
Tag: engine
The regulator test determines problems in the following components: the regulator, the field winding, the rectifier and the diode assembly. The regulator test does not…
Illustration 1 g00873381 Rectifier (1) Negative diode clips (2) Grounded heat sink (3) Positive diode clips (4) Insulated heat sink For the following tests, bend…
Illustration 1 g00872663 Field Winding (1) Leads (2) Housing Field Winding Continuity Test Remove the field winding from the alternator. Connect the multimeter leads across…
Illustration 1 g00873253 Diode Assembly (1) Terminal (2) Terminals Remove the diode assembly from the alternator. Set the multimeter to the diode scale. Connect the…
Illustration 1 g00901704 Capacitor (1) Housing (2) Terminal Remove the capacitor from the alternator. Touch terminal (2) to housing (1) in order to discharge the…
37-MT Starting Motors (12 Volt Systems) Illustration 1 g00810014 Connections for pinion clearance check for 12 volt system (1) Battery (2) Starting motor (3) Solenoid…
Table 1 Tools Needed 6V-7070 Digital Multimeter Brush Holder Test Illustration 1 g00800898 Typical example of a brush holder…
Note: The graphics that are illustrated in this section refer to the solenoids that are 24 VDC. Solenoids that are 12 VDC use the same…
Table 1 Tools Needed 6V-7070 Digital Multimeter 225-8266 Ammeter Tool Gp 1U-6602 Photo-Tachometer…