Refer to Special Instruction, SMHS7366, “Using the 5P-2050 Connecting Rod Checking Fixture ” for information on checking and on reconditioning connecting rods. Also refer to…
Tag: engine
Remove & Install Oil Pan Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…
Illustration 1 g00381492 Front sump Illustration 2 g00381512 Rear sump (1) Apply 9S-3263 Thread Lock Compound to the plug. Tighten the plugs to the following…
Remove & Install Engine Front Support Typical Example 1. Support the engine. 2. Remove bolts (1), and remove engine support (2). NOTE: The following step…
Illustration 1 g00388432 4N-4286 Engine Support (1) Rear housing group (2) Tighten the bolts to the following torque. … 215 ± 40 N·m (159 ±…
Illustration 1 g00286773 6I-3950 Engine Support (1) Front housing group (2) Tighten the bolts to the following torque. … 105 ± 20 N·m (75 ±…
Illustration 1 g00412238 Typical example (1) Speed timing sensor control group. Lubricate the threads with engine oil prior to installation. Tighten the bolts to the…
Remove & Install Flywheel Housing Start By: a. remove crankshaft rear seal and wear sleeve b. remove electric starting motor c. remove oil pan Typical…
Remove & Install Timing Gears & Plate Start By: a. remove timing gear cover NOTICE Do not turn the crankshaft with the camshaft gear removed.…
Remove & Install Timing Gear Cover Start By: a. remove fan drive b. remove oil pan c. remove engine front support 1. Remove cover (1)…