Illustration 1 g00284845 Typical example (1) A thin film of 2P-2333 High Temperature Sealer is applied to the outside diameter of the male end of…

Remove & Install Rocker Arm & Shaft Assemblies Start By: a. remove the valve cover(s) Valve rocker arms (1) and unit injector rocker arms (2)…

Remove & Install Valve Cover Base Start By: a. remove valve covers 1. Loosen the two nuts and remove connector (2) from electronic unit injector…

Remove & Install Valve Covers Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…

Illustration 1 g01431260 Typical Example Illustration 2 g00285630 Tightening Sequence For Valve Cover And Base Note: Apply 4C-4030 Thread Lock Compound to the bolts that…

Illustration 1 g00859782 (1) Valve rocker arm assembly (2) Valve lash Inlet valves … 0.38 ± 0.08 mm (0.015 ± 0.003 inch) Exhaust valves ……

Illustration 1 g00287811 (1) Ball (2) Diameter of rocker arm shaft … 40.000 ± 0.010 mm (1.5748 ± 0.0004 inch)

Illustration 1 g01431248 (1) Bearing joint (A) Bore in the rocker arm bearing for the rocker arm shaft New parts … 40.065 ± 0.015 mm…

Remove Pistons & Connecting Rod Assemblies Start By: a. remove cylinder head assembly b. remove oil pump Fluid Spillage Containment Care must be taken to…

Refer to Guideline for Reusable Parts, SEBF8049, “Pistons” and Guideline for Reusable Parts, SEBF8051, “Piston Pins and Retaining Rings”. Illustration 1 g00514913 Thoroughly lubricate the…