NOTE: Put LOCTITE No. 242 Adhesive/Sealant on outer bearing O.D. and housing bore before assembly. (1) Clearance between the water pump impeller face and front…
Tag: engine
Remove Water Temperature Regulators Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and…
Remove Water Temperature Regulators 1. Remove bolts (1). Remove elbow (2) and gasket from timing gear cover. 2. Remove water temperature regulators (3) from timing…
9N5121 Temperature when completely open … 92°C (198°F) (1) Minimum completely open distance … 37.85 mm (1.490 in) 102-8392 Temperature when completely open … 94°C…
Temperature when completely open … 197°F(92°C) (1) Distance at completely open temperature must not be more than … 1.490 in.(37.85 mm)
Remove Fuel Filter & Fuel Filter Base Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,…
Remove Engine Oil Cooler And Oil Filter Base NOTE: It is not necessary to remove the oil pan. 1. Remove the coolant from the cooling…
Remove Check Valve And Bypass Valve NOTICE Before any service work is done on the fuel system, the outer surface of the injection pump housing…
Oil pressure difference that makes the oil filter bypass valve open … 140 ± 30 kPa (20 ± 4 psi) Oil pressure difference that makes…
(1) Put 9S3263 Thread Lock Compound on the threads of the tapered end of the stud to a distance of … 7.6 ± 1.5 mm…