Illustration 1 g00288811 (1) Tighten the nuts to the following torque. … 25 ± 7 N·m (18 ± 5 lb ft)
Tag: 3406E
6BR1-UP Illustration 1 g00284836 Cylinder and valve location (A) Inlet. (B) Exhaust. Bore … 137 mm (5.4 inch) Stroke … 165 mm (6.5 inch) Displacement…
Remove & Install Fuel Transfer Pump Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing,…
Illustration 1 g00297167 Typical example (1) Inlet port (2) Pressure regulating valve The pump performance has the following specifications. The specifications are obtained when the…
Illustration 1 g02557382 (3) Spacer (4) Unit injector clamp Table 1 Specification for the 190-0009 Fuel Pump and Valve Mechanism, 148-7482 Fuel Pump and Valve…
Remove & Install Injector Sleeves *Part of 9U-6891 Sleeve Tool Group Start By: a. remove rocker arm and shaft assemblies b. remove electronic unit injectors…
Remove & Install Electronic Unit Injectors Start By: a. remove rocker shaft assembly Fluid Spillage Containment Care must be taken to ensure that fluids are…
Remove & Install Fuel Manifold Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…
Remove & Install Oil Pump Start By: a. remove oil pan Fluid Spillage Containment Care must be taken to ensure that fluids are contained during…
Illustration 1 g01527219 NOTICE Before operation, the pump must be lubricated with clean engine oil and the pump must turn freely by hand or damage…