Disassembly Procedure Start By: Remove the engine oil filter base. Refer to Disassembly and Assembly, “Engine Oil Filter Base – Remove”. Illustration 1 g01011623 Remove…
Tag: 3100 HEUI
Removal Procedure Note: Remove the turbocharger, if necessary. Refer to Disassembly and Assembly, “Turbocharger – Remove”. Illustration 1 g01026328 Remove oil filter assembly (1) with…
Typical Example (1) Oil filter bypass valve to open at … 125 ± 30 kPa (18 ± 4.5 psi) 9L9188 Spring for bypass valve: Outside…
(1) Bolt. Tighten bolts to a torque of … 7 ± 2 N·m (62 ± 18 lb in) (2) Fuel filter base.
Removal Procedure Illustration 1 g01181229 Disconnect tube assembly (1) from fuel pressure regulator (2) . Remove fuel pressure regulator (2) from the cylinder head. Installation…
Installation Procedure Illustration 1 g00644693 Position gear (9) and the washer on the unit injector hydraulic pump. Install bolt (8). Tighten the bolt to a…
Removal Procedure Start By: Remove the fuel transfer pump. Refer to Disassembly and Assembly, “Fuel Transfer Pump – Remove”. Remove the injection actuation pressure control…
Installation Procedure Illustration 1 g00644655 Use Tooling (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten…
Assembly Procedure Clean the injection actuation pressure control valve and the components for the injection actuation pressure control valve. Illustration 1 g01011197 (1) O-ring seal…
Disassembly Procedure Start By: Remove the injection actuation pressure control valve. Refer to Disassembly and Assembly, “Injection Actuation Pressure Control Valve – Remove”. Illustration 1…