Removal Procedure Illustration 1 g00644654 Disconnect harness assembly (2) from injection actuation pressure control valve (1) . Remove nut (3), the spacer, and the solenoid…
Tag: 3100 HEUI
(1) Fuel pump outlet. Final installation into pump, tighten to a torque of … 35 ± 3 N·m (26 ± 2 lb ft) (2) Fuel…
To replace cat 3126 fuel pump you need to follow this procedures: Removal Procedure Illustration 1 g00998298 Remove tube assembly (3) and tube assembly (2)…
Removal Procedure Illustration 1 g00998298 Remove tube assembly (3) and tube assembly (2) from fuel transfer pump (1). Plug and cap all openings. This helps…
Installation Procedure Use Tooling (B) to clean the sleeve of the unit injector. Illustration 1 g01233010 Install new O-ring seal (3) on unit injector (2)…
Removal Procedure Start By: Remove the rocker arms and the pushrods. Refer to Disassembly and Assembly, “Rocker Shaft and Pushrod – Remove”. Illustration 1 g00644454…
(1) Injection actuation pressure control valve. Final installation, tighten to a torque of … 50 ± 5 N·m (37 ± 4 lb ft) (2) Spacer.…
(1) Fuel pump outlet. Final installation into pump, tighten to a torque of … 35 ± 3 N·m (26 ± 2 lb ft) (2) Fuel…
(1) Body group. (2) Solenoid valve assembly. (3) Barrel group. (4) Nozzle group Six orifices evenly spaced.
Section View A-A (1) Injector hold-down clamp. (2) Bolt. Tighten to torque … 30 ± 7 N·m (22 ± 5 lb ft) (3) Bolt. Tighten…