Electronic Control System Components (left side view) (1) Injection actuation pressure control valve. (2) Injection actuation pressure sensor. (3) Timing calibration connector J24/P24. (4) Wiring…
Author: sam
(1) Injection actuation pressure control valve. Final installation, tighten to a torque of … 50 ± 5 N·m (37 ± 4 lb ft) (2) Spacer.…
Assemble the Starting Motor Note: The following procedure is only for the 24 volt starting motor. 1.Lubricate the following items with SAE 20W oil: bushings,…
Disassemble the Starting Motor Remove the starting motor from the machine. Illustration 1 g00704122 1.Disconnect the connector (3) from the motor terminal. Disconnect the negative…
Assemble the Starting Motor Illustration 1 g00810281 1.Put SAE 20W oil on all bushings, seals and oil wicks. 2.Put field winding coil (29) and pole…
Illustration 1 g00810589 1.Put SAE 20W oil on all bushings, seals and oil wicks. 2.Put field winding coil (24) and pole shoes (25) in position…
Disassemble the Starting Motor Start By: A.Remove the starting motor from the machine. Note: The disassembly of the 12 volt starting motor is similar to…
Disassemble the Starting Motor Note: The disassembly and assembly that follows is of the 24 volt starting motor. The 12 volt is similar. Illustration 1…
Illustration 2 g00801373 42-MT Cross section view (1) Nut (Battery) (2) Solenoid Mounting Screws (3) Pinion (4) Pinion Drive Housing Bolts (5) Shift Lever Housing…
Illustration 1 g00782868 37-MT and 41-MT Cross section view (1) Nut (Battery) (2) Solenoid Mounting Screws (3) Pinion (4) Pinion Drive Housing Bolts (5) Shift…