Removal Procedure Start By: Remove the rocker arms and the pushrods. Refer to Disassembly and Assembly, “Rocker Shaft and Pushrod – Remove”. Illustration 1 g00644454…
Author: sam
(1) Injection actuation pressure control valve. Final installation, tighten to a torque of … 50 ± 5 N·m (37 ± 4 lb ft) (2) Spacer.…
(1) Fuel pump outlet. Final installation into pump, tighten to a torque of … 35 ± 3 N·m (26 ± 2 lb ft) (2) Fuel…
(1) Body group. (2) Solenoid valve assembly. (3) Barrel group. (4) Nozzle group Six orifices evenly spaced.
Section View A-A (1) Injector hold-down clamp. (2) Bolt. Tighten to torque … 30 ± 7 N·m (22 ± 5 lb ft) (3) Bolt. Tighten…
Left Side Of Engine (1) Fuel inlet port (2) Tube assembly (fuel from tank). (3) Spacer
Removal Procedure Illustration 1 g00644400 Use Tooling (A) to remove fuel filter (10) . Place an identification mark (5) on crankcase breather (3) and fuel…
(1) Fuel filter. (2) Fuel inlet. (3) Fuel outlet. (4) Heater … 12 V/150 W (5) Temperature sensor. Fuel temperature 2°C (35°F) … ONFuel temperature…
Left Side Of Engine (1) Tube assembly (fuel transfer pump to fuel filter). (2) Tube assembly (fuel filter to fuel gallery). (3) Fitting (fuel return…
8WL1-UP Cylinder And Valve Location Bore … 105.025 ± 0.025 mm (4.134 ± 0.0010 in) Stroke … 127 mm (5.0 in) Displacement … 6.6 liter…