Use a DC Voltmeter to find starting system components which do not function. Move the start control switch to activate the starter solenoid. Starter solenoid…
Author: sam
The condition of charge in the battery at each regular inspection will show if the charging system operates correctly. An adjustment is necessary when the…
Rubber Vibration Assembly (1) Crankshaft. (2) Hub. (3) Rubber (4) Ring. (5) Alignment marks. If the damper is damaged, or if the bolt holes in…
Checking Bore Runout Of The Flywheel (Typical Example) (1) 7H1945 Holding Rod (2) 7H1645 Holding Rod (3) 7H1942 Indicator (4) 7H1940 Universal Attachment 1. Install…
1. Install the dial indicator as shown. Always put a force on the crankshaft in the same direction before the indicator is read so the…
1. Fasten the dial indicator as shown so the anvil of the indicator will touch the bore of the flywheel housing. 2. With the dial…
8T5096 Dial Indicator Group Installed (Typical Example) If any method other than given here is used, always remember bearing clearance must be removed to get…
1. Check coolant level in the cooling system. 2. Look for leaks in the system. 3. Look for bent radiator fins. Be sure that air…
Water Pump Group (1) Port (alternate heater supply). (2) Port (for engine diagnosis). (3) Ports (heater return). The pressure rise (increase in pressure or pressure…