Installation Procedure Illustration 1 g00644693 Position gear (9) and the washer on the unit injector hydraulic pump. Install bolt (8). Tighten the bolt to a…
Author: sam
Removal Procedure Start By: Remove the fuel transfer pump. Refer to Disassembly and Assembly, “Fuel Transfer Pump – Remove”. Remove the injection actuation pressure control…
Installation Procedure Illustration 1 g00644655 Use Tooling (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten…
Assembly Procedure Clean the injection actuation pressure control valve and the components for the injection actuation pressure control valve. Illustration 1 g01011197 (1) O-ring seal…
Disassembly Procedure Start By: Remove the injection actuation pressure control valve. Refer to Disassembly and Assembly, “Injection Actuation Pressure Control Valve – Remove”. Illustration 1…
Removal Procedure Illustration 1 g00644654 Disconnect harness assembly (2) from injection actuation pressure control valve (1) . Remove nut (3), the spacer, and the solenoid…
(1) Fuel pump outlet. Final installation into pump, tighten to a torque of … 35 ± 3 N·m (26 ± 2 lb ft) (2) Fuel…
To replace cat 3126 fuel pump you need to follow this procedures: Removal Procedure Illustration 1 g00998298 Remove tube assembly (3) and tube assembly (2)…
Removal Procedure Illustration 1 g00998298 Remove tube assembly (3) and tube assembly (2) from fuel transfer pump (1). Plug and cap all openings. This helps…
Installation Procedure Use Tooling (B) to clean the sleeve of the unit injector. Illustration 1 g01233010 Install new O-ring seal (3) on unit injector (2)…