(1) Bolt. These bolts secure the fuel tank assembly to the Base assembly. For more information please refer to Base Assembly in this publication. A.…
Author: sam
Left Side View Right Side View (1) Left rear support. Use four bolts for attaching to the engine and use one bolt for attachment to…
Rear View (1) 25.4 mm (1.000 in) by 25.4 mm (1.000 in) angle iron support. For more information please refer to Fuel Tank Assembly in…
(1) Fork lift channels. (2) Bolt holes for fuel tank assembly. For more information please refer to Fuel Tank Assembly in this publication. (3)…
Right Side View (1) Alternator Pulley Shield. Assemble to belt guard (3) with two bolts, four washers, and two locknuts. A. Length (from edge to…
(1) Air intake assembly. (2) 100-8302 gasket. NOTE: Remove any gasket maker that remains on the inlet air heater. (3) Air intake plate. (4) Wrapper…
(1) Front Bracket. (2) Support Plate. Bolt to the air cleaner mounting group (3). (3) 4P3439 Air Cleaner Mounting Group. Attaches to the right hand…
Left Side View (1) Remote box. (2) Air cleaner. (3) Exhaust muffler. (4) Radiator. (5) Junction box. (6) Air compressor. (7) Battery. (8) Suction fan.…
Symptom: 1. Compressor passes excessive oil as evidenced by presence of oil at exhaust ports of valving or seeping inlet from air starter. Cause: A.…
Torques All torques specified in this manual are assembly torques and can be expected to fall off after assembly is accomplished. Do not retorque after…