Timing Advance Unit (1) Gear on camshaft for fuel injection pump. (2) Timing advance unit. (3) Camshaft for the engine. Timing Advance Unit (4) Weights.…
Author: sam
Fuel systems on the 3208 Engines use four types of torque control groups; the stop bar, the torque spring (leaf), the fuel temperature compensator, and…
Cross Section Of Fuel System (1) Lever. (2) Governor housing. (3) Load stop pin. (4) Cover. (5) Sleeve control shafts (two). (6) Inside fuel passage.…
Water Separator (1) Vent valve. (2) Drain valve. Some engines have a water separator. The water separator is installed between the fuel tank and the…
Pencil Type Fuel Injection Nozzle (1) Cap. (2) Lift adjustment screw. (3) Pressure adjustment screw. (4) Locknut (for adjustment screw). (5) O-ring seal. (6) Fuel…
The fuel injection nozzle goes through the cylinder head into the combustion chamber. The fuel injection pump sends fuel with high pressure to the fuel…
SMFS And HSMFS Differences (1) Fuel air ratio control (FARC). (2) Sleeve control lever assembly (HSMFS). (3) Sleeve control lever assembly (SMFS). (4) Sleeve (HSMFS).…
SMFS Pressure Relief To Tank (1) Pressure relief to tank valve. (2) Spring. Some sleeve metering fuel systems feature a pressure relief to tank valve…
A. Fuel Injection Pump uses a reverse flow check valve (RFC). B. Fuel Injection Pump uses an orificed delivery valve (ODV). C. Fuel Injection Pump…
Heavy Sleeve Metering Fuel System (HSMFS) Fuel Flow Schematic (1) Fuel priming pump (closed position). (2) Fuel priming pump (open position). (3) Return line for…