Remove Fuel Injection Lines
1. Disconnect lines (1) and (2).
2. Remove bolt (3) from the bracket.
3. Loosen nuts (4) at the cylinder head and the fuel injection pump. Remove the fuel lines and install caps or plugs on all openings.
Install Fuel Injection Lines
1. Put fuel injection lines (1) in position.
2. Tighten the nuts with tooling (A) to a torque of 30 ± 5 lb.ft. (40 ± 7 N·m).
3. Connect two lines (3) and line (2).
4. Install bolt (4) in the bracket.