Valve Mechanism Cover – Remove and Install
Removal Procedure
Illustration 1 g00820158
1.Remove the bolts that hold valve mechanism cover (1) to valve mechanism cover base (2) .
2.Remove the seal from the valve mechanism cover.
Installation Procedure
Illustration 2 g00820158
Illustration 3 g00611545
Bolt tightening sequence for the valve mechanism cover
(A) Rear
(B) Front
1.Position valve mechanism cover (1) and the seal on valve mechanism cover base (2). Cut the seal to length. Apply Tooling (A) on both sides of the seal joint.
2.Install the bolts. Tighten the bolts in a numerical sequence to a torque of 9 N·m (80 lb in).