Installation Procedure
1.Inspect the turbocharger gasket for wear or damage. If the turbocharger gasket is worn or damaged, use a new part for replacement.
2.Apply Tooling (A) on the threads of the mounting studs for the turbocharger.
3.Position the turbocharger gasket and turbocharger (6) on the exhaust manifold. Install nuts (4) and tighten nuts (4) to a torque of 54 ± 5 N·m (40 ± 4 lb ft).
4.Inspect the gaskets for oil supply tube assembly (5) and oil drain tube assembly (2). If the gaskets are worn or damaged, use a new part for replacement.
5.Position oil drain tube assembly (2) and the gasket on turbocharger (6). Install bolts (1) on the turbocharger and install bolts (3) on the cylinder block.
6.Install the gasket for oil supply tube assembly (5) and connect oil supply tube assembly (5) to turbocharger (6) .