(1) Cylinder Block.
(2) Gasket.
(3) Bolt (location marked “Z”). Length of bolt … 30.0 mm (1.18 in)
(4) Bolt (location marked “Y”). Length of bolt … 20.0 mm (0.79 in)
(5) Cover. Clean cover face with solvent. Apply 1U8846 Gasket Maker to cover. Spread uniformly on face and around the bolt holes. Cover must be installed and tightened within ten minutes.
(6) Length that sleeve (7) extends from face of cylinder block … 5.0 ± 0.5 mm (0.20 ± 0.02 in)
(7) Sleeve (location marked (“X”).