Installation Procedure
1.Lubricate the camshaft and the camshaft bearings with clean engine oil.
2.Carefully install camshaft (4) and camshaft gear (1) in the engine.
3.Ensure that timing mark (5) on the camshaft gear is aligned with timing mark (6) on the idler gear.
4.Install camshaft retainer plate (2) and bolts (3) .
End By:
a.Install the front cover. Refer to Disassembly and Assembly, “Front Cover – Install”.
b.Install the side cover. Refer to Disassembly and Assembly, “Lifter Group – Remove and Install”.
c.Install the Unit Injector Hydraulic Pump. Refer to Disassembly and Assembly, “Unit Injector Hydraulic Pump – Install”.
d.Install the Rocker Shaft and Pushrods. Refer to Disassembly and Assembly, “Rocker Shaft and Pushrod – Install”.