Remove Air – Fuel Ratio Control 1. Remove two bolts (1). 2. Remove air-fuel ratio control and gasket. Install Air – Fuel Ratio Control 1.…
Tag: engine
(1) 8N5083 Spring: Length under test force … 14.40 mm (.567 in) Test force … 95.2 ± 6.7 N (21.39 ± 1.51 lb) Free length…
(1) 8N5083 Spring: Length under test force … .567 in.(14.40 mm) Test force … 21.4 ± 1.5 lb.(95.2 ± 6.7 N) Free length after test…
Cylinder, Valve And Injection Pump Location Bore … 114.3 mm (4.5 in) Stroke … 127.0 mm (5.0 in) Number Of Cylinders … 8 Cylinder Arrangement…
Bore … 4.5 in.(114.3 mm) Stroke … 5.0 in.(127.0 mm) Number of Cylinders … 8 Cylinder Arrangement … 90°V Firing Order (Injection Sequence) … 1,2,7,3,4,5,6,8…
Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine.…
NOTE: The specifications given for “use again” and “permissible” are intended for guidance only and Caterpillar Tractor Co. hereby expressly denies and excludes any representation,…
When the words “use again” are in the description, the specification given can be used to determine if a part can be used again. If…
NOTE: The specifications given for “use again” and “permissible” are intended for guidance only and Caterpillar Tractor Co. hereby expressly denies and excludes any representation,…
The specifications given in this book are on the basis of information available at the time the book was written. These specifications give the torques,…