Problem-Remote CAN Network receives no data from Local CAN Network Probable Cause Confirm the PL1000T is properly connected to system power. Confirm the key switch…
Tag: engine
Caterpillar Electronic Technician (Cat ET) Caterpillar Electronic Technician (Cat ET) is a software program that can be used on an IBM compatible personal computer. Cat…
The location of the service tool connector will vary between applications. CAT ET can be connected to the system as follows: By using the 7X-1700…
The Caterpillar service tools that are listed in Table 1 are required in order to enable a service technician to perform the procedures. Table 1…
Refer to the appropriate system or engine harness schematics if a troubleshooting procedure instructs to “ANALYZE AND REPAIR THE HARNESSING”. Continuity checks and resistance checks…
Test Step 1. Perform the Alternator Output Test. Results: OK – The alternator is normal. Stop.
System Operation Description: The alternator is an electronic component that is belt driven. The alternator is used to charge the storage battery during engine operation.…
The following service tools should be used to aid in the troubleshooting of the alternator charging system. Table 1 Service Tools Part Number…
Often when problems with the charging system are being investigated, the alternator is not the problem. If a low battery condition is present, test the…
System Operation Description: The possible causes of this failure are listed below: The battery is discharged or the battery is faulty. The cables to the…