Illustration 1 g01095901 Note: Apply a small amount of clean engine oil or glycerin onto the lip of seal (7). Also, apply a small amount…
Tag: engine
Illustration 1 g00285933 (1) Receptacle (2) Sensor assembly Apply anti-seize compound to the threads. Tighten sensor assembly to the following torque. … 45 ± 5…
Illustration 1 g00285681 Typical example (1) Sensor assembly Tighten the sensor assembly to the following torque. … 15 ± 3 N·m (11 ± 2 lb…
Illustration 1 g01342188 (1) Sensor Assembly Tighten the sensor assembly to the following torque. … 10 ± 2 N·m (90 ± 18 lb in) (2)…
Illustration 1 g02554200 Table 1 Specification for the 194-6725 Pressure Sensor Gp , 161-9931 Pressure Sensor Gp , 163-8523 Pressure Sensor Gp , 299-3222 Pressure…
Illustration 1 g00382899 (1) Sensor assembly Tighten sensor assembly to the following torque. … 30 ± 5 N·m (22 ± 4 lb ft) (2) Receptacle
Illustration 1 g00393140 120/240 VAC, 3000 Watts (1) Coolant outlet Assemble the hose. A gradual rise must be maintained from the heater outlet to the…
Remove & Install Personality Ratings Module 1. Loosen the Allen screws and disconnect the wiring harnesses from the Electronic Control Module. 2. Remove the four…
Remove & Install Electronic Control Module 1. Loosen the Allen screws from connectors (2) and (3) on Electronic Control Module (1). Disconnect connectors (2) and…
Assembly Procedure Table 1 Tools Needed 1P510 Driver Gp 1 Note: Before assembly, clean all parts in cleaning fluid.…